Campbell Hausfeld Reference Design Bedienerhandbuch PDF herunterladen

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT

DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COM-

PLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

Description

Campbell Hausfeld sandblasting equipment is designed

for cleaning and removing rust, scale, paint, grime and

dirt for stripping, polishing and etching projects. This

equipment can be used with sand, abrasive powders,

or water and other liquids.

Unpacking

After unpacking the sandblasting kit, carefully inspect

for any damage that may have occurred during transit.

Check for loose, missing or damaged parts.

General Safety Information

1. Read this instruction manual before installing this

device to the compressor pump.

2. Safety glasses or face shield, gloves and a respirator

must be worn during operation. Always work in a well

ventilated area.

3. During operation, do not expose the hands or skin

directly in the line of the blast nozzle.

4. After installation, inspect to make sure all compo-

nents seal properly.

5. Keep children away at all times. All visitors must be

kept a safe distance and wear safety glasses, gloves

and a respirator.

6. Do not exceed the maximum operating pressure of

the sandblasting equipment (125 PSI).

DISCONNECT THE SANDBLASTER FROM THE

AIR SUPPLY BEFORE CHANGING ACCESSORIES

OR ATTEMPTING TO INSTALL, SERVICE, RELO-

CATE OR PERFORM ANY MAINTENANCE.

WARNING

Figure 3

DANGER

Figure 2

WARNING

7. Check hoses and air lines for weak or worn condition

before each use. Make sure all connections are

secure before use.

DO NOT POINT THE SANDBLAST GUN AT ANY-

ONE OR OBJECTS OTHER THAN THE INTENDED

WORK OBJECT.

8. Do not depress the trigger when connecting the air

supply hose.

DO NOT WORK AROUND OILY RAGS OR FLAM-

MABLE LIQUIDS. SAND STRIKING METAL CAN

CAUSE A SPARK AND CREATE A FIRE OR EX-

PLOSION.

DO NOT SPRAY ACIDS OR CAUSTICS.

Figure 1

IN241900AV 1/93

OPERATING INSTRUCTION MANUAL

SANDBLASTING KITS

MODELS AT125102AJ, AT121002AJ, AND

AT121102AJ

CAMPBELL

HAUSFELD

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - HAUSFELD

__ 1 __READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCTDESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL S

Seite 2 - Assembly

__ 2 __3. Attach the material hose to the hose connector.Attach the opposite end of the material hose to thegun (See Figure 6).NOTE: DO NOT cover the

Seite 3 - Operation

__ 3 __InstallationIt is recommended that sandblasting equipment beused with commonly available sandblast cabinets. How-ever, a temporary sandblasting

Seite 4 - Limited Warranty

__ 4 __OperationSand(20-40)General purpose use. Removing light rust and paint from metal, wood or other surfaces; woodfinishing; metal cleaning; glass

Seite 5 - Technical Service

__ 5 __Suggested UsesGround Pecanor WalnutShells & CornCob Meal1-6"Move gun back and forth over the template in abrushing manner. Blast at a

Seite 6 - Troubleshooting Chart

__ 6 __Troubleshooting ChartSputtering – particle Hose connector hole is covered Uncover hose connector holecloggingSputtering – vacuum leak 1. Loose

Seite 7 - Service Notes

__ 7 __IN241900AVMODELS AT125102AJ, AT121002AJ AND AT121102AJService Notes

Seite 8

__ 8 __Service NotesIN241900AVMODELS AT125102AJ, AT121002AJ AND AT121102AJ